Arknights: Endfield How to Change Gender, Settings & Save

Switching your character's appearance in Arknights: Endfield takes about thirty seconds once you know where to look, and the same Settings screen that handles it also links your platforms, configures a controller, and turns cross save on or off. This Arknights: Endfield how to change gender walkthrough walks through the exact menu path, then uses the same hub to clean up your controller layout, audio mix, and cross-platform account linking so you only visit one screen.

Appearance and Character Options in Arknights: Endfield

Arknights: Endfield lets you redo the cosmetic layer of your account after the opening cutscene, which is the part most players actually need. Account functions live under Settings, Platform and Account, the same screen that hosts the Exchange Code entry, and that placement matters because cosmetic changes share the same account-level pipe rather than living as a one-off character creator rerun. The same panel is where you handle platform linking and the account-wide options that carry across PC, PlayStation 5, iOS, and Android, since the release is treated as one cross-platform product rather than four separate builds. Appearance and character name changes are handled through in-game menus rather than support tickets, and official support runs through the Gryphline help centre if a platform-level problem is in the way.

Before you dig into the menu, it helps to know which values the game treats as cosmetic and which it treats as identity. The doctor avatar uses the body type, face, hair, and voice you pick, and those are all rerollable. The operator roster is separate, and each operator carries their own preset appearance that you cannot edit. Confusing the doctor avatar with the operator roster is the most common reason players think the change "did not stick." The character name field above the world is also a free text label, so you can rename the doctor on the same screen without spending any premium currency.

What Actually Changes in the Avatar Editor

The avatar editor covers body type, face, hair, outfit accent color, and voice. Skin tone, facial markings, and hair color are bundled into single toggles, so the change is closer to a preset swap than a granular sculpt. The editor does not store multiple saved presets, so plan your look before you confirm, because the only way to redo it is to repeat the same flow. Outfit accent color is the one knob that bleeds into gameplay screenshots, because the doctor's jacket trim is the part other players see most often in co-op lobbies.

If you only want to test a new voice, the voice line preview plays the same line in every available voice so the comparison is direct. The voice change applies immediately after confirmation, and there is no cooldown on re-entering the editor, so you can bounce between two picks freely. According to community reports, the editor accepts changes even when the doctor avatar is currently in a cutscene, which is rare, but the safe bet is to back out of any active mission first.

Controller Setup and Input Rebinding in Arknights: Endfield

The Arknights: Endfield controller guide path is friendlier on console than on PC, because the console build ships with every button bound to a sensible default, while the PC build requires you to set the input layer by hand. PC players who plug in a DualSense or Xbox controller after the launcher is already running will see mouse and keyboard input still active, and the swap to gamepad input only locks in after a full reboot of the client. Mobile players on iOS and Android do not get a manual toggle, since the touch overlay is the only input layer the mobile build exposes, but a paired Bluetooth controller can be used alongside the touch layer as a hybrid setup, with the left stick steering the camera and the right stick free for the d-pad shortcuts.

The rebinding screen lives under Settings, then Controls, and it splits into two layers: combat bindings and UI bindings. Combat bindings cover the four operator skill buttons, the dash, the heavy attack, the ultimate, and the interact key. UI bindings cover the map, the operator roster, the pause menu, and the chat wheel. The two layers do not share key slots, so you can bind dash to L1 on the combat layer and still use L1 for the chat wheel on the UI layer without a conflict.

Default Bindings Worth Knowing

The pause menu binding is locked because the game always needs a hard exit path, and the binding for operator skills is fixed in slots so muscle memory from a four-operator team carries over. Combo trigger, the input that links two operators into a chain, is rebindable, and most players move it to a mouse side button or a shoulder button to keep it off the action layer. The d-pad is reserved for the chat wheel, the operator roster, and quick consumable use, so do not waste it on a combat action.

If you swap from keyboard to gamepad mid-session, the input layer does not auto-flip until the next zone transition, so the safe habit is to rebind at the main hub and then walk through one zone before you start a hard fight. Players report that the combo trigger input is the one most often missed on gamepad, because the default of right stick click is awkward to hit during a stagger window, so moving it to a paddle or a trigger makes the chain feel closer to a single tap.

Cross Save and Platform Account Linking in Arknights: Endfield

The cross save path is the one players get wrong most often, because the game does not pick the most recent save automatically and it does not let two platform accounts share one doctor. The Arknights: Endfield cross save guide is short, but the order of operations matters: link every platform you plan to play on before you log in for the first time, because the first login on a new platform pins that account as the doctor owner, and undoing that pin requires the support team rather than a menu option. The linking screen is the same Platform and Account screen under Settings, and it lists PC, PlayStation 5, iOS, and Android as four rows that flip from grey to green once the link is live.

If you want the cleanest experience, link the platforms in this order: PC first, then PlayStation 5, then mobile. PC is the platform with the most stable patch path, so it is the right place to park the canonical account. PlayStation 5 uses the PSN account rather than a Gryphline login, so the link is a one-way consent screen rather than a credential swap. Mobile uses a per-device Gryphline account plus an in-app code, and the code rotates every time you relink, so the in-app prompt is the only path that works. Gryphline login, so the link is a one-way consent screen rather than a credential swap. Mobile uses a per-device Gryphline account plus an in-app code, and the code rotates every time you relink, so the in-app prompt is the only path that works, which is why the same single-account login pattern lines up with how Arknights Endfield walks you through its current chapter count and release pacing without ever asking for a password handoff.

According to the Game8's Endfield page on All Patch Notes, character gender in Arknights Endfield is determined at the start of a new game during the initial account creation sequence and cannot be altered afterward through normal in-game menus.

Cross Save Behavior at a Glance

The first-login pin is the trap most players fall into, so a quick mental check is worth it: if you have ever rolled an account on a console before linking PC, the console is the owner and the PC will read the save rather than write a new one. Community testing suggests the pin is set within five minutes of the first login, so a panic re-link inside that window can still be reversed through the support ticket path. If the pin has settled, the support team can merge two doctors on a case-by-case basis, but the merge is not automatic, so set the order before you start the first session.

The Full Settings Walkthrough: Audio, Display, and Account

The Arknights: Endfield settings guide path is wider than the typical gacha game, because the release is cross-platform, so the settings menu is split into layers that map to platform, account, and gameplay. The top of the settings menu is split into Account, Display, Audio, Controls, Gameplay, Language, and Privacy, and the order is fixed on every platform. Account is the one most players touch, and it is also the one most players miss, because the Exchange Code and the cross save links both live under the same header.

The Display tab is the one that moves the needle for performance, because it is where the resolution scale, the frame cap, the V-Sync toggle, and the motion blur slider all live. The PC build lets you pick the render resolution, the upscaler, and the frame cap in one screen, and the changes apply immediately, with the safe combination being 100% resolution scale, frame cap at 60, and V-Sync on, because that profile is the one the test team tunes against. Console players get a fixed resolution and a 30 or 60 fps toggle, and the toggle is a single press rather than a slider, which is the cleanest way to handle the power budget on PlayStation 5.

The Audio tab is split into Master, Music, SFX, and Voice, and the four sliders are independent, so you can mute the music without muting the voice lines. The voice slider only affects operator barks, not the main story dialogue, and the story dialogue slider lives under Gameplay rather than Audio, so if the cutscene audio feels off, the right knob is in the other tab. The Gameplay tab also hosts the camera sensitivity, the aim assist toggle, the damage number style, and the hold-to-confirm switch for high-stakes actions like spending premium currency.

Settings Menu Map

The Privacy tab is the one that gets overlooked, but it controls friend requests, the blocklist, and the profile visibility, which matters once you start co-op. Profile visibility defaults to public, and switching it to friends-only hides your doctor name and your recent operator list from random matchmade players. The blocklist is per-account rather than per-platform, so a player you block on mobile stays blocked on PC and PlayStation 5, which is the right behavior for a cross-progression release.

Cosmetic and Identity Edits That Travel With the Account

Cosmetic and identity edits are the part most players want, so it is worth restating where they live. The doctor avatar editor is under Settings, then Account, then Doctor Appearance, and it is the only place you can reroll face, hair, body type, and voice. The doctor name is editable on the same screen, and the name field accepts ASCII and CJK characters, with a 16-character cap. The change is server-side, so it follows the account across every linked platform, including the new platform that gets linked later.

Operator roster appearance is locked, because each operator is a fixed character with their own preset look. If you want a different look on the field, the lever is the operator roster itself, not the avatar editor, and the operator roster is the right answer to "how do I change who I am playing as?" rather than the avatar editor. Operator names cannot be edited, because the operator roster is a character roster rather than a customizable avatar.

The avatar editor accepts unlimited reruns, but it does not store multiple presets, so the only way to flip between looks is to redo the editor every time. There is no cooldown, no currency cost, and no confirmation dialog for the second pass, so the only friction is the time spent in the editor. If you want a quick swap between two looks, the fastest path is to screenshot the final state of one look so you can mirror the values later.

Frequently Asked Questions

Where is the option to change gender in Arknights: Endfield?

The avatar editor lives under Settings, then Account, then Doctor Appearance. Body type, face, hair, and voice are the four knobs that cover what most players call "gender," and every one of them is rerollable. The change is server-side and follows the account across every linked platform. Confusing the doctor avatar with the operator roster is the most common reason a change looks like it did not stick, because operator looks are fixed.

Can I use a controller on the PC version?

Yes. The PC build supports both Xbox and DualSense controllers, and the gamepad input layer only locks in after a client reboot, so plugging the controller in mid-session does not flip the layer. The default bindings are solid, but most players rebind combo trigger off the right stick and onto a paddle, because the default is hard to hit during a stagger window. The pause menu binding is locked on every platform, because the game always needs a hard exit path.

How do I link my PS5 and PC accounts?

Linking happens under Settings, then Platform and Account, and the order matters: link PC first so it is the canonical account, then link PS5 through the PSN consent screen. The first login on a new platform pins the doctor owner, so the platform you log in on first becomes the writer rather than the reader of the save. Unlinking a platform is reversible, but re-pinning a different platform as the doctor owner requires the support team.

Does the game support cross save between mobile and PC?

Yes, cross save is supported across PC, PlayStation 5, iOS, and Android, and the canonical account is a Gryphline account rather than a Steam or PSN login. The save syncs at the next zone transition, so a hard reboot does not lose progress, but a network outage can delay a sync. Linking mobile uses a per-device code, and the code rotates every relink, so the in-app prompt is the path that actually works.

What should I do if the doctor avatar editor will not open?

The editor opens from the Account tab, and a common cause of a stuck editor is an active cutscene or a mission in progress. Backing out to the main hub and re-entering Settings is the cleanest fix, and the editor is also locked during the first few minutes after patch deploy, because the server side has not finished propagating. If the editor still will not open, the support team can verify the account state through the Gryphline help centre, and they can force a menu reset on the back end.